Upgrading The 4602Sw And 4602D Phones - Avaya G450 Installing And Upgrading

Upgrading the 4602SW and 4602D phones

1. Check the available memory size for the image files using the show
application-memory command. If the memory size is smaller than the combined sizes
of the image files for the phones, proceed to step 2, otherwise proceed to step 5.
2. Set the memory size for the image files using the ip tftp-server file-system
size command. For example:
G450-001(super)# ip tftp-server file-system-size 18128
To change ip tftp-server file system size, copy the running configuration
to the start-up configuration file, and reset the device
G450-001(super)
3. Copy the running configuration to the start-up configuration using the copy
running-config startup-config command. For example:
G450-001(super)# copy running-config startup-config
Beginning copy operation ................... Done!
4. Reset the G450 using the reset command. For example:
G450-001(super)# reset
This command will reset the device
*** Reset the device *** - do you want to continue (Y/N)? y
Resetting the device...
5. From the Avaya Support website, download the desired phone upgrade files (script files,
boot image files, phone application image files) to a remote FTP server at IP address
192.168.49.10.
TFTP IP telephone upgrade examples
Issue 2 June 2008 117