Connecting The Iolan; Setting Up Hyperterminal On The Computer; Administering The Iolan+ The First Time - Avaya G450 Installing And Upgrading

4. Rebooting the IOLAN+
Note:
Depending on the computer's COM port, you may not need all of these pieces.
Note:

Connecting the IOLAN+

1. Connect the DB9 end of the DB9-to-DB25 cable to the COM port on the PC or laptop.
2. Connect the DB25 end to the null modem adapter.
3. Connect the other end of the null modem adapter to the DB25 to RJ-45 cable.
4. Connect the RJ-45 end to Port 1 of the IOLAN+.
5. Before beginning the initial administration, make sure you have the following information:
New IP address and subnet mask for IOLAN+
●
Host name for IOLAN+
●
IP address of S8300 Server Ethernet interface
●
Port number of S8300 Server Ethernet interface where adjunct connects
●
Use the HyperTerminal software program that comes with Windows 95/98/NT/2000 to
administer the IOLAN+.

Setting up HyperTerminal on the computer

1. Open HyperTerminal.
2. Click the File > Properties > Connect tab.
a. In the Connect using: field, select COM n,
where n is the communication port your computer is using.
3. Click CONFIGURE
a. Set the bits per second field to 9600.
b. Set the Flow control field to Hardware.
4. Click OK.
5. Press ENTER to get the login prompt.

Administering the IOLAN+ the first time

1. At the login prompt type any text and press ENTER.
on page 252
Terminal server installation
Issue 2 June 2008 249