Chapter 3: Connecting Devices; Connecting Devices; Roadmap For Connecting Devices - Avaya G430 Installation And Upgrades

Chapter 3: Connecting devices

Connecting devices

External endpoint devices can be connected to the ports on the front panels of the installed media
modules and to the fixed front panel ports. Before you connect endpoint devices, the Branch
Gateway, and EM200s if desired, should be mounted and all media modules should be inserted.
Warning:
To reduce the risk of fire, use only 26 AWG or larger telecommunication line cords when
installing telephones or adjuncts, or connecting to any media module telecommunication ports.
Related links

Roadmap for connecting devices

Data and voice device connections
Circuit protection installation
Connecting an E1/T1 WAN link to the MM340 media module
Coupled Bonding Conductor installations
Avaya Partner Contact Closure Adjunct installations
Roadmap for connecting devices
Connect these devices in the following order using the appropriate procedure described in this
section:
1. Data and voice devices
2. Circuit protection
3. Wide Area Network (WAN)
4. Coupled Bonding Conductor (CBC)
5. Avaya Partner Contact Closure Adjunct
Related links
Connecting devices
February 2017
on page 43
on page 44
on page 52
on page 54
on page 43
Installation and Upgrades for the Avaya Branch Gateway G430
Comments on this document? infodev@avaya.com
on page 53
on page 54
43