Password And Final Screens - Avaya G450 Installing And Upgrading

Running the Avaya Installation Wizard (Avaya IW)

Password and final screens

1. To change your password (optional) and complete the installation, click Continue from the
SNMP Configuration screen.
The Change Root Password screen appears. This screen allows you to change the root
password on the G450.
Figure 115: The Change Root Password screen
2. Click Continue. The Authentication File screen appears if there is a resident server on the
gateway and if you selected Translations will be added after the installation has been
completed using the SAT, ProVision, ASA or another Integrated Management tool in
the Translation Source screen
The Authentication File screen displays the installed status of the authentication file and
enables you to install or replace the file from the laptop or LAN source. Without a valid
authentication file, you cannot access the Avaya Communication Manager. If the screen
displays Not Installed, you must install the file now. To install a new authentication file:
a. Check Install New Authentication file.
b. Enter the full path of the authentication file in the File Path field.
202 Installation and Upgrades for the Avaya G450 Media Gateway
(Figure 77).