Avaya G450 Installing And Upgrading page 129

5. Let the G450 operate for about 5 minutes so that it will boot and erase the current
configuration.
6. Remove the G450 main board as described in
board on page 93.
7. Remove the bridge.
!
Important:
If you do not remove the bridge, the G450 will continue to initialize the NVRAM
Important:
when it resets or is powered up.
8. Insert the G450 main board as described in
board on page 93.
Removing and inserting the G450 main
Removing and inserting the G450 main
CLI is not accessible
Issue 2 June 2008 129