Upgrading The Software Without A Cd-Rom Drive; Remote Configuration; Performing The Upgrade - Avaya G450 Installing And Upgrading

Upgrading the Avaya Communication Manager software
2. Connect the USB modem to either of the two USB ports in the Avaya S8300 Server.
Note:
You may be required to enable the modem and port. For instructions on enabling
Note:
the modem, see
access
3. Connect a USB CD-ROM drive to the free USB port on the Avaya S8300 Server. Then,
insert the CD-ROM provided by Avaya into the CD-ROM drive.

Upgrading the software without a CD-ROM drive

You can upgrade the Avaya Communication Manager software without a CD-ROM drive by
downloading the upgrade software or installing it from a laptop computer.

Remote configuration

Remote configuration via Telnet — upgrade the software remotely via Telnet. In this
●
scenario, a modem is required at the local site. See
modem for remote access
Remote configuration via network — upgrade the software remotely via a network
●
connection

Performing the upgrade

You can upgrade the S8300 using Avaya IW or the Upgrade tool. To upgrade S8300 software
using Avaya IW, see
page 151. For information about upgrading S8300 firmware using the Upgrade tool, see
Appendix D: Running the Gateway Installation Wizard (GIW)
100 Installation and Upgrades for the Avaya G450 Media Gateway
Chapter 4: Connecting and enabling a modem for remote
on page 63.
on page 63.
Appendix C: Running the Avaya Installation Wizard (Avaya IW)
Chapter 4: Connecting and enabling a
on page 209.
on