Firmware configuration
3. Click Continue. The SNMP Configuration screen appears. Check Enable SNMP
Alarming if you want to enable the sending of SNMP traps to the INADS. Check the
Alarm Abbreviation checkbox if you want to enable SNMP alarm abbreviation. Click Add
Trap Destination to add an SNMP trap destination IP address. You can add multiple
destinations. For each destination, enter the INADS IP address in the Destination IP
Address field. In the Community Name field, enter an SNMP community access string.
Check the Enable checkbox to enable each trap destination.
Figure 114: The SNMP Configuration screen
Issue 2 June 2008
201