Connecting The Grounding Cable - Avaya IG550 Installing And Configuring

Installing an IG550 Integrated Gateway using the Disk on Key

Connecting the grounding cable

Note:
The grounding cable must meet the following specifications:
Note:
- Be 10 AWG
- Able to handle up to 8 Amps amperage
- Have a ring-type, vinyl-insulated TV14-6R lug or equivalent to accommodate the 10
AWG cable.
1. Connect the grounding cable to an earth ground.
2. Attach the lug on the cable to the chassis grounding point, with the screw (see
Figure 5, or Figure
Figure 4: Grounding and power connections to the J4350 chassis
Figure 5: Grounding and power connections to the J6350 chassis
24 Installing and Configuring the IG550 Integrated Gateway
6).
Figure 4,