Patches For Emulex Pci Express (Pcie) Cards; Patches For Qlogic Pcie Cards; Upgrading To Xcp 1090 Or Xcp 1091 - Sun Microsystems SPARC Enterprise M8000 Product Notes

Patches for Emulex PCI Express (PCIe)
Cards
The following Emulex cards require drivers supplied in patch 120222-27:
Sun StorageTek
■
(part SG-XPCIE2FC-EM4)
Sun StorageTek Enterprise Class 4-Gigabit Single-Port Fiber Channel PCIe HBA
■
(part SG-XPCIE1FC-EM4)

Patches for QLogic PCIe Cards

The following QLogic cards require drivers supplied in patch 125166-10:
Sun StorageTek Enterprise Class 4-Gigabit Dual-Port Fiber Channel PCIe HBA
■
(part SG-XPCIE2FC-QF4)
Sun StorageTek Enterprise Class 4-Gigabit Single-Port Fiber Channel PCIe HBA
■
(part SG-XPCIE1FC-QF4)

Upgrading to XCP 1090 or XCP 1091

You can upgrade to XCP 1090 or XCP 1091 from XCP version 1050 or higher. Refer to
the Sun SPARC Enterprise M3000M4000/M5000/M8000/M9000 Servers XSCF User's
Guide for instructions.
Note – After updating the firmware to XCP 1090 or XCP 1091, use the
rebootxscf(8) command to reset the XSCF.
10 Sun SPARC Enterprise M8000/M9000 Servers Product Notes for XCP 1091 • May 2010
™
Enterprise Class 4-Gigabit Dual-Port Fiber Channel PCIe HBA