Cisco ASA 5505 Configuration Manual page 1175

Chapter 56 Configuring Trend Micro Content Security
Guidelines and Limitations
This section includes the guidelines and limitations for this feature.
Context Mode Guidelines
Supported in single and multiple context modes. In multiple-context mode, all panes under the CSC
Setup node are available only in the admin context. You can restore the default password only in
multiple-context mode in the system context.
Firewall Mode Guidelines
Supported in routed and transparent firewall modes.
Failover Guidelines
Does not support sessions in Stateful Failover. The CSC SSM does not maintain connection information,
and therefore cannot provide the failover unit with the required information. The connections that a CSC
SSM is scanning are dropped when the adaptive security appliance in which the CSC SSM is installed
fails. When the standby adaptive security appliance becomes active, it forwards the scanned traffic to the
CSC SSM and the connections are reset.
IPv6 Guidelines
Does not support IPv6.
Model Guidelines
Supported on the ASA 5510, ASA 5520, and ASA 5540 only.
Default Settings
Table 56-1
Table 56-1
Parameter
FTP inspection on the adaptive security appliance Enabled
All features included in the license(s) that you
have purchased
OL-20339-01
An e-mail address and an SMTP server IP address and port number for e-mail notifications.
–
IP addresses of hosts or networks that are allowed to manage the CSC SSM. The IP addresses
–
for the CSC SSM management port and the adaptive security appliance management interface
can be in different subnets.
– Password for the CSC SSM.
lists the default settings for the CSC SSM.
Default CSC SSM Parameters
Default
Enabled
Cisco ASA 5500 Series Configuration Guide using ASDM
Guidelines and Limitations
56-3