Cisco ASA 5505 Configuration Manual page 1233

Chapter 59 Configuring Active/Standby Failover
Screen
Monitoring > Properties > Failover > Status
OL-20339-01
Purpose
The Status pane displays the failover state of the system. In single context
mode you can control the failover state of the system by doing the
following:
Forcing a failover.
•
Resetting a failed device.
•
• Reloading the standby unit.
See Controlling Failover, page
The Failover state of the system field contains the output of the show
failover command. Refer to Cisco ASA 5500 Series Command Reference
for more information about the displayed output.
Cisco ASA 5500 Series Configuration Guide using ASDM
Monitoring Active/Standby Failover
59-12, for more information.
59-15