Cisco ASA 5505 Configuration Manual page 1339

Chapter 64 General VPN Setup
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Add/Edit Internal Group Policy > Client Configuration Dialog Box
The Add or Edit Group Policy dialog box, Client Configuration dialog box contains three tabs that let
you configure general client parameters, Cisco client parameters, and Microsoft client parameters.
For information about the individual dialog boxes, see the following links:
•
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Add/Edit Internal Group Policy > Client Configuration > General Client Parameters
This dialog box configures client attributes that are common across both Cisco and Microsoft clients,
including the banner text, default domain, split tunnel parameters, and address pools.
The AnyConnect VPN client and the SSL VPN client do not support split DNS.
Note
Fields
•
•
OL-20339-01
The VPN 3002 hardware client software is automatically updated via TFTP.
–
Security Context
Transparent Single
—
•
Add/Edit Internal Group Policy > Client Configuration > General Client Parameters, page 64-29
Add/Edit Internal Group Policy > Client Configuration > Cisco Client Parameters, page 64-31
Add or Edit Internal Group Policy > Advanced > IE Browser Proxy, page 64-32
Security Context
Transparent Single
—
•
Inherit—(Multiple instances) Indicates that the corresponding setting takes its value from the
default group policy. Unchecking the Inherit check box makes other options available for the
parameter. This is the default option for all attributes on this tab.
Banner—Specifies whether to inherit the banner from the default group policy or enter new banner
text. To insert a new line in a paragraph, use the /n tag. For more information, see
Banner.
Multiple
Context System
— —
Multiple
Context System
— —
Cisco ASA 5500 Series Configuration Guide using ASDM
ACL Manager
View/Config
64-29