Cisco ASA 5505 Configuration Manual page 1329

Chapter 64 General VPN Setup
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Browse Source/Destination Address
The Browse Source or Destination Address dialog box lets you select an object to use as a source or
destination for this rule.
Fields
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Browse Source/Destination Port
The Browse Source or Destination Port dialog box lets you select a source or destination port for this
protocol in this rule.
Fields
•
•
OL-20339-01
Security Context
Transparent Single
— •
Type—Determines the type of object to use as the source or destination for this rule. Selections are
IP Address Objects, IP Names, Network Object Groups, and All. The contents of the table following
this field change, depending upon your selection.
Source/Destination Object Table—Displays the objects from which you can select a source or
destination object. If you choose All in the type field, each category of object appears under its own
heading. The table has the following headings:
Name—Displays the network name (which may be an IP address) for each object.
–
IP address—Displays the IP address of each object.
–
Netmask—Displays the network mask to use with each object.
–
Description—Displays the description entered in the Add/Edit/Paste Extended Access List Rule
–
dialog box.
Security Context
Transparent Single
—
•
Add—Opens the Add TCP Service Group dialog box, in which you can configure a new TCP service
group.
Find—Opens the Filter field.
Multiple
Context System
— —
Multiple
Context System
— —
Cisco ASA 5500 Series Configuration Guide using ASDM
ACL Manager
64-19