Cisco ASA 5505 Configuration Manual page 1314

Default Tunnel Gateway
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Default Tunnel Gateway
To configure the default tunnel gateway, click the Static Route link. The Configuration > Routing >
Routing > Static Route dialog box opens.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Cisco ASA 5500 Series Configuration Guide using ASDM
64-4
list, an update is in order. The user of a Windows, MAC OS X, or Linux-based VPN client must
download an appropriate software version from the listed URL. The VPN 3002 hardware client
software is automatically updated via TFTP.
Image URL—Lets you type the URL for the software/firmware image. This URL must point to a
file appropriate for this client.
For a Windows, MAC OS X, or Linux-based VPN client, the URL must include the protocol
–
HTTP or HTTPS and the server address of the site that contains the update. The format of the
URL is: http(s)://server_address:port/directory/filename. The server address can be either an IP
address or a hostname if you have configured a DNS server. For example:
http://10.10.99.70/vpnclient-win-4.6.Rel-k9.exe
The directory is optional. You need the port number only if you use ports other than 80 for HTTP
or 443 for HTTPS.
For the hardware client: The format of the URL is tftp://server_address/directory/filename. The
–
server address can be either an IP address or a hostname if you have configured a DNS server.
For example:
tftp://10.1.1.1/vpn3002-4.1.Rel-k9.bin
The directory is optional.
Security Context
Transparent Single
— •
Security Context
Transparent Single
—
•
Multiple
Context System
— —
Multiple
Context System
— —
Chapter 64 General VPN Setup
OL-20339-01