Cisco ASA 5505 Configuration Manual page 1146

Licensing Requirements for the AIP SSM/SSC
Figure 54-3
Figure 54-4
inline mode); each defined traffic flow goes to a different sensor.
Figure 54-4
Differences Between the AIP SSM and the AIP SSC
The AIP SSM supports the higher performance requirements of the ASA 5510 and above, while the
AIP SSC is designed for the small office installation of the ASA 5505 adaptive security appliance. The
following features are supported on the AIP SSM, but not on the AIP SSC:
•
•
•
Licensing Requirements for the AIP SSM/SSC
The following table shows the licensing requirements for this feature:
Cisco ASA 5500 Series Configuration Guide using ASDM
54-4
Security Contexts and Virtual Sensors
Security Appliance
Main System
Context
1
Context
Sensor
1
AIP SSM/SSC
shows a single mode adaptive security appliance paired with multiple virtual sensors (in
Single Mode Security Appliance with Multiple Virtual Sensors
Security Appliance
Main System
Sensor
1
AIP SSM/SSC
Virtual sensors
Anomaly detection
Unretirement of default retired signatures
Chapter 54
2
Context
3
Sensor
2
Traffic 1
Traffic 2
Traffic 3
Sensor Sensor
2 3
Configuring the IPS Application on the AIP SSM and SSC
OL-20339-01