Chapter 56
Configuring Trend Micro Content Security
What to Do Next
See the
IP Configuration
The IP Configuration pane lets you configure management access for the CSC SSM, the DNS servers it
should use, and a proxy server for retrieving CSC SSM software updates.
To configure management access and other related details for the CSC SSM, perform the following
steps:
Step 1
Choose Configuration > Trend Micro Content Security > CSC Setup > IP Configuration.
Step 2
Set the following parameters for management access to the CSC SSM:
•
•
•
Step 3
Set parameters of the DNS servers for the network that includes the management IP address of the CSC
SSM.
•
•
(Optional) Enter parameters for an HTTP proxy server, used by the CSC SSM to contact a CSC SSM
Step 4
software update server. If your network configuration does not require the CSC SSM to use a proxy
server, leave the fields in this group blank.
•
•
What to Do Next
See the
Host/Notification Settings
The Host/Notification Settings pane lets you configure details about hostname, domain name, e-mail
notifications, and a domain name for e-mail to be excluded from detailed scanning.
To configure host and notification settings, perform the following steps:
Step 1
Choose Configuration > Trend Micro Content Security > CSC Setup > Host/Notification Settings.
Step 2
In the Host and Domain Names area, set the hostname and domain name of the CSC SSM.
OL-20339-01
"IP Configuration" section on page
Enter the IP address for management access to the CSC SSM.
Enters the netmask for the network containing the management IP address of the CSC SSM.
Enter the IP address of the gateway device for the network that includes the management IP address
of the CSC SSM.
Enter the IP address of the primary DNS server.
(Optional) Enter the IP address of the secondary DNS server.
Enter the IP address of the proxy server.
Enter the listening port of the proxy server.
"Host/Notification Settings" section on page
56-5.
56-5.
Cisco ASA 5500 Series Configuration Guide using ASDM
CSC SSM Setup
56-5