IBM X3950 X5 Problem Determination And Service Manual page 1039

W.58007 [W.58007] Invalid memory configuration (Unsupported DIMM Population) detected. Please verify
memory configuration is valid.
Explanation: Unsupported DIMM Population
Severity: Error
User response: Complete the following steps:
Could follow an uncorrectable memory error or failed memory test. Check log and service that event first.
1.
DIMMs disabled by other errors or actions could cause this event.
Ensure that the DIMM connectors are populated according to the guidelines in the service information for this
2.
product.
W.58017
Explanation: DIMM Re-Enabled
Severity: Warning
User response: Complete the following steps:
1. No action; information only.
W.580A1 [W.580A1] Invalid memory configuration for Mirror Mode. Please correct memory configuration.
Explanation: Unsupported DIMM Population for Mirror Mode
Severity: Error
User response: Complete the following steps:
1. If a DIMM connector error LED is lit, resolve the failure.
2. Make sure that the DIMM connectors are correctly populated for mirroring mode, according to the service
information for this product.
W.580A2 [W.580A2] Invalid memory configuration for Sparing Mode. Please correct memory configuration.
Explanation: Unsupported DIMM Population for Spare Mode
Severity: Error
User response: Complete the following steps:
1. Make sure that the DIMM connectors are correctly populated for sparing mode, according to the service
information for this product.
W.580A3 [W.580A3] Invalid memory configuration for Lock-Step Mode. Please correct memory configuration.
Explanation: Unsupported DIMM Population for Lockstep Mode
Severity: Warning
User response: Complete the following steps:
1. Make sure that the DIMM connectors are correctly populated for lock-step mode, according to the service
information for this product.
W.58007 • W.580A3
Appendix C. UEFI/POST error codes
1023