Figure 7-6 Yel (Yellow) And Red Alarm Indicators (Shown With The Waveform Option Activated) - Olympus 45MG User Manual

DMTA-10022-01EN, Rev. C, January 2015
NOTE
The thickness value and the alarm indicator only appear in color when the indoor
color scheme is active (see "Color Schemes" on page 47 to change the color scheme).
REDUCTION RT
The REDUCTION RT option only appears when the active file is configured with
FILE DATA MODE set to REDUCTION RT. You set the reduction percentage for
the low (YELLOW ALARM) and high (RED ALARM) limits, following which the
instrument displays (see Figure 7-6 on page 134):
• The RED indicator for reduction rates that are greater than or equal to the
RED ALARM value.
• The YEL indicator for reduction rates that are between the YELLOW ALARM
and the RED ALARM values.
• The GRN indicator for reduction rates that are below the YELLOW ALARM
value.
Figure 7-6 YEL (yellow) and RED alarm indicators (shown with the Waveform
To set the alarm
1. In the measurement screen, press [SETUP], and then select ALARM.
134 Chapter 7
YEL alarm indicator
option activated)
RED alarm indicator