11.4 Capturing Screen Images; Sending A Screen Capture To Gageview - Olympus 45MG User Manual

11.4 Capturing Screen Images

It is possible to save a screen capture of the full 45MG screen contents to an image file.
This function is useful when you need an exact replica of the display for reporting or
documentation purposes. A screen capture can be sent to GageView or the external
microSD card.
11.4.1

Sending a Screen Capture to GageView

It is possible to send the full 45MG screen contents to the GageView interface
program.
Refer to the GageView Interface Program — User's Manual (P/N: 910-259-EN [U8778347])
for information on how to install and use GageView.
To send a screen capture to GageView
1. Set the USB communication parameters, and then connect the 45MG to the
computer (see "Setting Up USB Communication" on page 187).
2. On the 45MG, select the screen that you want to capture.
3. On the computer, start up GageView.
4. In GageView, the following tasks are only to be performed the first time you
connect the 45MG to GageView on this computer:
a) On the GageView menu, select Device > Config.
b) In the Device Configuration dialog box (see Figure 11-4 on page 194):
(1) In the Device List, select 45MG, and then click Add.
45MG (USB) appears in the Current Configured Devices list.
(2) Select the Connect at Startup check box to ensure that GageView
automatically attempts to connect to the 45MG upon start-up.
(3) Click OK.
Managing Communications and Data Transfer
DMTA-10022-01EN, Rev. C, January 2015
193