Figure 6-16 Identifying Datalogger Parameters - Olympus 45MG User Manual

DMTA-10022-01EN, Rev. C, January 2015
Contents
Measurement
data
You can identify the datalogger parameters in the ID bar at the top of the
measurement screen (see Figure 6-16 on page 90).
ID bar
ID number
With each measurement, the 45MG also stores a complete description of the
measurement conditions. Table 6 on page 91 describes the additional data stored with
each thickness measurement and with each waveform.
90 Chapter 6
Table 5 File contents summary (continued)
Organized by predefined IDs arranged by file
types
Data format defined by the file data mode
Saved data (thickness measurement with or
without the waveform) configured using the
setup menu

Figure 6-16 Identifying datalogger parameters

Description
Previous thickness
See section
"Data File
Types" on
page 93
"File Data
Modes" on
page 104
"Saving
Data" on
page 65