Table 22 Environmental Rating Specifications; Table 23 Measurement Specifications - Olympus 45MG User Manual

Table 21 Other EN15317 specifications (continued)
Parameter
Calibration
Display response time
Number of pixels to display a
waveform

Table 22 Environmental rating specifications

Parameter
IP rating
Explosive atmosphere
Shock test
Vibration test
Drop test
Parameter
Measurement modes
V-path correction
Single or two-point calibration using a test block
Velocity can be entered manually.
Normal (4 Hz) or fast (up to 20 Hz) for dual element
transducers
Adjustable: 4 Hz, 8 Hz, 16 Hz, and Max (up to 20 Hz) for
single element transducers
320 × 240 pixels
Designed for IP67
MIL-STD-810G, Section 511.5, Procedure I
MIL-STD-810G, Section 516.6, Procedure I
MIL-STD-810G, Section 514.6, Procedure I
MIL-STD-810G, Section 516.6, Procedure IV- Transit Drop

Table 23 Measurement specifications

Standard dual element: Time between excitation pulse and
first back-wall echo using dual element transducer.
Dual Echo-to-Echo: Time between successive back-wall
echoes using dual element transducers.
THRU-COAT: Time between excitation pulse and first back-
wall echo while ignoring or displaying a coating thickness.
Mode 1: Time between excitation pulse and first echo
following a blank period using contact transducers.
Mode 2: Time between the interface echo and the first back-
wall echo. Normally used with delay line or immersion
transducers.
Mode 3: Time between a pair of back-wall echoes following
the interface echo. Normally used with delay line or
immersion transducers.
Automatic, dependent on transducer type
DMTA-10022-01EN, Rev. C, January 2015
Value
Value
Value
Technical Specifications 211