Figure 9-10 Example Of A Linearized Db Grid - Olympus 45MG User Manual

NOTE
The ID number increments in the order assigned when the file was initially set up
independent of the TRANSPOSE GRID value.
5. Set LINEARIZE GRID to ON to display the grid IDs in the linear form (see
Figure 9-10 on page 161).
6. Set DATA CELL FLAG to one of the available options in order to display a single
data flag with each data cell in the DB grid. The data cell flag is a letter that
appears in a small box to the right of the thickness value in the data cell (see
Figure 9-7 on page 159). The available options are:
NONE
No data cell flag appears.
MIN/MAX
"m" indicates a minimum thickness.
"M" indicates a maximum thickness.
ALARM
"L" indicates any kind of low alarm condition, including a standard low
alarm condition.
"H" indicates any high alarm condition.
7. Set GRID COLOR OPTION to ON to activate usage of low, mid, and high-range
colors for the grid cell background.
8. Set LO RANGE COLOR to the desired cell background color (RED, YELLOW, or
GREEN) when the cell thickness value is smaller than the LO RANGE VALUE.
9. Set MID RANGE COLOR to the desired cell background color (RED, YELLOW,
or GREEN) when the cell thickness value is between the LO RANGE VALUE and
the HI RANGE VALUE.

Figure 9-10 Example of a linearized DB grid

DMTA-10022-01EN, Rev. C, January 2015
Using Advanced Gaging Features 161