Figure 7-8 Example of a locked function message in the help bar
To set the password
1.
In the measurement screen, press [SETUP], and then select PASSWORD.
2.
In the PASSWORD screen (see Figure 7-9 on page 137), enter your password
using up to eight alphanumeric characters.
IMPORTANT
If you forget your password, you can unlock the instrument and deactivate the
password by entering the master password: "OLY45MG".
To change the password, you must first use the master password to deactivate the
password, and then set a new password.
3.
Select DONE to activate the instrument lock and return to the measurement
screen.
Figure 7-9 The PASSWORD screen
DMTA-10022-01EN, Rev. C, January 2015
Using Special Functions
137