Activating Software Options - Olympus 45MG User Manual

DMTA-10022-01EN, Rev. C, January 2015
Option
Single Element
including High
Resolution
(see
"Measurements
with Optional
THRU-COAT,
D7906, and
D7908
Transducers" on
page 76)
High
Penetration with
Single Element
(see "High-
Penetration
Software
Option" on
page 88)
When you order a software option with your original 45MG purchase, the option
comes preactivated. Software options can also be purchased at a later date. The
software options can be activated by entering an activation code in the instrument,
without the need to return the instrument to the factory. (see "Activating Software
Options" on page 68).
Contact your local Olympus representative for more information about ordering
software options. Refer to Table 3 on page 67 for the software-option part numbers.
6.1

Activating Software Options

Each 45MG has a unique serial number code. A provided option key specific to a
particular 45MG activates the purchased software options only on that specific 45MG
unit. A single-option key is capable of activating one, several, or all software options.
68 Chapter 6
Table 3 45MG software options (continued)
Part
number
45MG-SE Enables the 45MG to use single element
(U8147022) transducers. With this option, the user can
recall default single element transducers, and
also create and store custom single element
transducer setups. This feature also increases
the thickness resolution to either 0.001 mm or
0.0001 in. for single element transducers with a
frequency ≥2.25 MHz.
45MG-HP Enables the 45MG to use low-frequency single
(U8147023) element transducers (as low as 0.5 MHz) for
thickness measurements in attenuating and
sound scattering materials.
Description