Selecting The Text Edit Mode; Editing Text Parameters Using The Virtual Keyboard - Olympus 45MG User Manual

NOTE
In the remainder of this document, the above procedure is summarized by the simple
instruction to select a specific parameter or list, and its value. For example:
"In the MEAS screen, set MEAS MODE to THICKNESS."
3.4

Selecting the Text Edit Mode

The 45MG offers two methods of editing the value of alphanumeric parameters.
Either the virtual keyboard or traditional method can be used. The virtual keyboard
appears on the screen to display all the available characters that can be used (see
"Editing Text Parameters Using the Virtual Keyboard" on page 39 for details). With
the traditional method, you must select each character from a hidden list of standard
sorted letters, numbers, and special characters (see "Editing Text Parameters Using
the Traditional Method" on page 41 for details).
To select the text edit mode
1. In the measurement screen, press [SETUP], and then select SYSTEM.
2. In the SYSTEM screen, highlight TEXT EDIT MODE, and then select the desired
mode (VIRTUAL or TRADITIONAL).
3. Press [MEAS] to return to the measurement screen.
3.4.1

Editing Text Parameters Using the Virtual Keyboard

When TEXT EDIT MODE is set to VIRTUAL, the virtual keyboard appears when an
alphanumeric parameter is selected (see Figure 3-9 on page 40).
DMTA-10022-01EN, Rev. C, January 2015
Software User Interface Elements 39