Figure 3-19 Dip Switch For The Tme1 Module - Siemens HiPath 1100 Service Manual

DIP Switch positions for the TME1 module
Figure 3-19 DIP Switch for the TME1 module
It is possible to configure the following settings by changing the positions of the Dip switches:
DIP Switch 1 (S1)
●
Allows you to delete the flash memory, or choose the baud rate.
Switch Procedure
1 FE
2 EST
2 EST
3 BR1
4 BR2
5 BR3
6 RES
7 RES
8 RES
Table 3-18 TME1 module, DIP Switch 1
Service Manual
Meaning
Flash memory off
Extended Autotest
(E1 CAS access)
Reserved for future applications (S2M access)
Baud rate
configuration
Possible settings
ON - Deletes Flash memory when the PABX is
turned on
OFF - System will work as usual (default).
ON - Activates autotest (E1 CAS access)
OFF - Skips autotest (default) (E1 CAS access).
(3) OFF, (4) OFF and (5) OFF: 9600 bps
(3) OFF, (4) OFF and (5) ON: 19200 bps
(3) OFF, (4) ON and (5) OFF: 38400 bps
(3) OFF, (4) ON and (5) ON: 57600 bps (default)
For future applications
Modules
Expansion modules (EB)
3-73