Modules
Motherboard (MB)
Baby Board VCC module interface
This module is connected on the MB and is an AC/DC converter used in HiPath 1120 V6.0 and
V7.0. Input voltages are 23V AC and the ring voltage, which depends on the country. Output
voltages are: 3.3VDC, 5 VDC, 24VDC, 32VDC and the ring voltage added to the offset voltage.
Figure 3-2
HiPath 1120 Baby Board VCC module
Baby Board VCC module Connector assignments
Connects to MB through a pin Connector
Table 3-5
Baby Board VCC module Connectors HiPath 1120
3-54
X1 and X2 Connectors
Service Manual