System Data
Technical standards and compliance
2.7.1
International Safety Standard
IEC 60950
●
2.7.2
Environmental conditions
Air Temperature (the
Relative humidity
Table 2-12
Environmental conditions
Servicing conditions (mechanical)
This system was essentially designed for installation at a fixed location.
●
Warning
!
Tthe avoid condensation when shipping the system in extremely low
●
temperatures, keep the equipment in its packaging until it reaches room
temperature. Proceed thereafter with the installation (acceptable temperature
range: 7.5•C (45.5•F)/30 min)
Do not expose the equipment to direct sunlight or place it near any heat sources
●
(to avoid a localized increase of temperature)
Make sure the installation area is dry. During system operation avoid any
●
conditions that may cause condensation.
Forced ventilation is not required.
●
Do not block the natural flow of air around the equipment.
●
Do not expose the equipment to the weather.
●
2-40
Operation
F
)
+41 to +86
5% to 85 %
Transportation
-13 to +158
95%
Storage
41 to +113
5% to 95%
Service Manual