Digital Trunk Settings - Siemens HiPath 1100 Service Manual

Configuring the system specifically for the client
Table of the System's Programming Codes
6.2.12

Digital trunk settings

Programmed Code
Functions
S Ports 062
0
Operation Mode 190
*
for S
0 Line
Symmetric/Asym- 074
metric Call
No ACK Setup for 075
S
0 Line
Notify 076
Automatic Keypad 077
Assignment of a 078
digital line to an
MSN
External line prefix 189
External number 191
registration
Assignment of an 192
MSN to attendants
6-230
Intermediate data
Position/slot:
HiPath 1120: 02
HiPath 1150: 03
HiPath 1190: 01 and 11
01, 02, 03 or 11
+
00 to 01 (HiPath 1120 - 00 PP or
PMP only)
00 to 04 (HiPath 1150)
00 to 04 (HiPath 1190)
01, 02, 03 or 11
+
00 to 01 (HiPath 1120 - 00 PP or
PMP only)
00 to 04 (HiPath 1150)
00 to 04 (HiPath 1190)
01, 02, 03 or 11
+
00 to 01 (HiPath 1120 - 00 PP or
PMP only)
00 to 04 (HiPath 1150)
00 to 04 (HiPath 1190)
01, 02, 03 or 11
+
00 to 01 (HiPath 1120 - 00 PP or
PMP only)
00 to 04 (HiPath 1150)
00 to 04 (HiPath 1190)
Position: 001 to 140
1 - National
2 - International
Position: 001 to 140
Position: 001 to 140
+
1 - Day service
2 - Night service
3 - Day service, second attendant
4 - Night service, second attendant
Data to be
programmed
1 - External line and exten-
sion
2 - External line
3 - Extension
1 - Point-to-point connec-
tion (PP)
2 - Point-to-Multipoint
connection (PMP)
3 - S
0 Bus line
∗
- Asymmetric
# - Symmetric
∗
- to enable
# - to disable
∗
- to enable
# - to disable
∗
- to enable
# - to disable
external line or
∗
- to delete
Line prefix (up to 5 digits)
DID final digits (up to 20
digits)
Extension, Call Group (CG,
HG or UCD with up to 10
extensions per group) or
EVM Virtual Port (744 to
747).
∗
- to delete
Completing Default
data entry
# instead of 1 - external
slot position line and
extension
# instead of 1 - First port
slot position 3 - All other
ports
Automatic # - Symmet-
ric
Automatic Depending
on the coun-
try
Automatic Depending
on the coun-
try
Automatic # - to disable
# instead of All assigned
slot position lines
# instead of None
the digit or
automatic
# instead of None
slot position
# instead of None
extension
Service Manual