Operation - Siemens HiPath 1100 Service Manual

Hide thumbs Also See for HiPath 1100:
Table of Contents

Advertisement

Operation

7
Operation
This chapter describes the procedures for powering up and initializing the systems.
Warning
!
Powering up and initializing the system is a task that must be performed only by au-
thorized technical personnel.
Step
1.
Connecting the system to the power supply
(Connecting the Power Cable ->Initialization of the interface).
2.
Activating System Programming
3.
Programming with a Telephone Set
4.
System programming mode using a PC
5.
HiPath 1100 applications
Connecting the system to the power supply
Procedure
Step
1.
Complete installation of all modules and system (Chapter 4, "Installation").
2.
Connect the interface.
3.
Wait a few moments for the system to load the software.
Activating System Programming
The system HiPath 1100 comes with a factory default configuration, described in the
programming tables for each code.
If an update or modification is required, there are two possible programming options:
Using a system telephone or a Standard MF telephone
Using a computer
7-278
Action (Instructions)
Procedure
Programming Options
7-278
7-278
7-279
7-280
7-333
Page
7-279
7-280
Service Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hipath 1190Hipath 1150Hipath 1120

Table of Contents