PSU HiPath 1190/1190R Interfaces
PSU without battery input
Indication of slot
slot position on the
backplane
PSU with battery input
Indication of slot
slot position on the
backplane
Warning!
Cable polarity indication is printed on the
case over the Connectors.
1 - Connector used to link the PSU's via the
Interconnect cable between the PSU's and
also used to connect the batteries via the PSU -
battery interconnect cables in the 1st PSU
located in the base of the system (see "Battery
interconnect cables (BBU)" on page 3-122)
2 - Connector for connecting the Vshare cable to
the PSU's
Figure 3-34
PSU systems interfaceHiPath 1190/1190R
Service Manual
Power Supply Unit (PSU)
-
+
1
3
2
Modules
AC input
2
1
3-97