Installation
Installing a USB Interface
4.11
Installing a USB Interface
Introduction
To connect a PC to the HiPath 1100 using a USB interface you must have a USB adapter cable
(see "USB adapter cable" on page 3-116). This interface allows you to use certain applications
developed specifically for configuring and managing user features.
Warning
!
The installation drivers are on the Setup and Installation CD.
4.11.1
On the HiPath1120/1150
Figure 4-42
Illustration of USB cable connection
Connections
Step
1.
Plug the USB adapter cable (with the male Mini DIN Connector) into the 4-pin Mini
DIN Connector on the motherboard (Figure 4-42).
2.
Connect the A to B Standard end of the USB cable to the USB adapter, and connect
the other end to the computer or modem.
4-178
Procedure
Service Manual