Installing A Music Module; On The Hipath 1120 - Siemens HiPath 1100 Service Manual

4.7.10

Installing a Music module

4.7.10.1

On the HiPath 1120

Installation Procedures
Step Procedure
1. Turn off the power supply.
2. Remove the system's cover
3. Raise the system's top slot (MB).
4. Insert the module in the slot shown on figure 4-31.
5. Attach the MB to the module.
6. Make the connections to the appropriate module Connector (See "Music module"
on page 3-91).
7. Reassemble the entire set.
8. "Performing a visual inspection" on page 4-189.
9. Turn on the power supply.
10. Configure the required data (see "Operation" on page 7-278).
Assembly Diagram
Service Manual
Installation
Installing modules
4-161