4
Installation
4.1
HiPath 1100 Installation
About this Chapter
This chapter contains information on:
Installing the interface HiPath 1100. More information on additional equipment and
●
expansions can be found in the "List of modules" on page 3-44
Configuration (installation of modules).
●
Danger
!
Only authorized technical personnel should install this system.
Tools and equipment required
The following tools are required for installing a HiPath 1100 system:
–
Cutters and flat nose pliers
–
Standard screwdriver
–
Phillips screwdriver
–
Tool for attaching wires to the Main Distribution Frame
–
Drill
–
Hammer
–
Level
–
Tape measure
–
Digital multimeter for checking power and ground connections.
Service Manual
Installation
HiPath 1100 Installation
4-125