Main Configurations - Siemens HiPath 1100 Service Manual

Configuring the system specifically for the client
Table of the System's Programming Codes
6.2.1

Main Configurations

Programmed Code
Functions
Default Access to a 002
group of external
Lines
Special Class of 096
Service for a
Blocked Extension
COS assignment 111
Phonebook 112
Dialing Mode on an 119
external Analog
Line
Denied List 123
Permission List 124
6-208
Intermediate data
extension
extension
group of external lines
Day COS
class - 0 (No Permission)
Class - 1 (Denied List 1)
Class - 2 (Denied List 2)
Class - 3 (Denied List 3)
Class - 4 (Permission List 1)
Class - 5 (Permission List 2)
Class - 6 (Permission List 3)
Class - 7 (default for all lines)
Night service COS:
Class - 1 (Denied List 1)
Class - 2 (Denied List 2)
Class - 3 (Denied List 3)
Class - 4 (Permission List 1)
Class - 5 (Permission List 2)
Class - 6 (Permission List 3)
Class - 7 (Default for all lines)
Phonebook entry:
*
000 to 249
external analog line
Class of Service: 1, 2 or 3 +
List 1 - COS 1 - slots 01 to 10
List 2 - COS 2 - slots 01 to 25
List 3 - COS 3 - slots 01 to 35
Class of Service: 4, 5 or 6 +
List 1- COS 4 - slots 01 to 10
List 2 - COS 5 - slots 01 to 25
List 3 - COS 6 - slots 01 to 25
Data to
Program
Group of external lines
COS - 0 (No Permission)
COS-1 (Denied List 1)
COS-2 (Denied List 2)
COS-3 (Denied List 3)
COS-4 (Permission List 1 )
COS-5 (Permission List 2)
COS-6 (Permission List 3)
COS-7 (Default for all lines)
extension
Number (up to 20 digits)
1 - Analog line: Pulse (DP)
2 - Analog line: Multifre-
quency (MF)
Number (up to 16 digits)
Number (up to 16 digits)
Completing Default
data entry
# instead of 0
extension
# instead of 0
extension
# instead of Class - 77 for
extension all exten-
sions.
Note:
Class - 7 Day
Class - 7
Night
5-second time- All entries are
out blank
# instead of 2 - MF
external line
5-second time- See
out Table 6-8 on
page 6-218
5-second time-
out
Service Manual