Installation Procedures; Table 4-1 Hipath 1100 - Equipment Installation Procedures - Siemens HiPath 1100 Service Manual

Installation

Installation Procedures

4.2 Installation Procedures
Warning
!
Before installing the equipment, please read carefully all information and
●
recommendations provided in Chapter 1, "Important Information"
When connecting to live terminal equipment lines powered by an external AC
●
power source, the maximum number of terminal equipment allowed is 14 per
system. Exceeding this limit may damage the equipment and put user safety at
risk.
Check whether all AC and DC connections of the cables, modules and chassis
●
of the HiPath 1100 are correctly and properly connected before connecting the
client interface.
Step
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. "Recommendations concerning the Power Supply and Protection of the
13.
14.
15.
16.
Table 4-1 HiPath 1100 - Equipment installation procedures
4-126
Installation procedures (Information)
"Select the location for installing the equipment"
(Usually already defined)
"Unpacking system components"
"Getting to know your systems"
"HiPath1120/1150 wall mounting instructions"
"Installing modules"
"Installing the power supply"
"Connections to the system's MDF"
"Installing a V.24 Interface"
"Installing a USB Interface"
"Installing an external Audio Source"
"Installing a TFE - entrance telephone interface"
"Protective power outage relays"
"System cabling"
"Installing telephone terminals"
"Performing a visual inspection"
System"
4-127
4-128
4-128
4-137
4-138
4-163
4-170
4-177
4-178
4-180
4-180
4-182
4-185
4-186
4-186
4-189
Service Manual