Figure 7-49 Windows 2003 - Driver Location - Siemens HiPath 1100 Service Manual

Operation
Driver Installation
11. The installation of the USB drivers is now complete. CAPI applications installation will now
start automatically (see "CAPI Application setup" on page 7-331).
Windows 2003
You must have administrator's access privileges to install any software
Proceed as follows:
1. Connect the HiPath 1100 system to the computer
2. The Found New Hardware Wizard window will appear so that new drivers can be installed.
Choose "Install from a list or specific location (Advanced)" Click "Next" to proceed.
Figure 7-49 Windows 2003 - Driver location
3. A second window will open. Select "Search for the best CAPI in these locations" then select
"Include this location in the search". Under Browse, select the directory where the
decompressed driver is stored. Drivers can be found in the \Software\USB Drivers folder
of the CD. The drive is decompressed in C:\Temp (Default). If Admin is selected, use
C:TempoptiPoint_Adm_Drivers_039 directory. If Admin + CAPI is selected, use
CTempoptiPoint_AdmCAPI_ Drivers_039. Select a folder and click "Next"
7-326
Service Manual