Updating The Software - Siemens HiPath 1100 Service Manual

This feature does not work when option 1 "Caller ID/Number" is selected in Code 039.
Remote Administration password through an MSN (220)
This setting allows you to specify a password so that all incoming calls from a remote HiPath 1100 Manager that provides the
correct password can be authorized to execute Remote Administration. In the default configuration, no password is set.
To activate this feature, the feature "Without MSN Verification" (code 070) should be enabled.
Delete disconnected consoles (166)
This programming code should be used in case the warning message "NBR. MAX. MAX. KEY DIAL EXCED" is shown on the
display when connecting a console (optiPoint key module or optiPoint BLF) to an optiPoint 500 telephone set or activating a
virtual keypad on the system telephone (KS).
If this code is used, all the programmed keys of the disconnected consoles will be lost.
PABX Trace log (246)
This tool is used to monitor events that have occurred in the PABX over a certain time period. This code makes it possible to
configure the profiles to be monitored via the trace.
The trace can be started/ended using the HiPath 1100 Manager or the feature codes (see User Manual).
The default setting is trace not configured.
6.3.6

Updating the Software

SW Information (001)
This displays information about the system's software. To view this information use a system telephone with a display.
The switch must be connected to a PC and the CommServer and the APS Version Verifier must be running.
Local SW Update (060)
This feature initiates the download of the last software version released for the PC and then downloads the update for the
exchange. For this feature to work the system must be connected to a PC with CommServer and APS Version Verifier running.
Service Manual
Configuring the system specifically for the client
Comments about the system's programming codes
6-259