Siemens HiPath 1100 Service Manual page 235

If an extension is connected to a door opener device, the device cannot be config-
ured as an attendant.
Within a subscriber group, an incoming call rings at the first extension available, ac-
cording to the call distribution plan configured for the UCD subscriber group.
When there is no first attendant configured, the call is forwarded to the overflow ex-
tension. If no overflow extension is configured, the call ends. In such cases no ex-
tension is signaled, the call cannot be captured, and the
system will continue to wait until the carrier clears this external line and makes it
available.
Special class of service for blocked extensions (096)
This allows you to switch a blocked extension (with an electronic lock) to any class of service.
Speed Dial/Phonebook (112)
You can store up to 250 telephone numbers of up to 20 digits each in the System Speed Dial. You can assign a name of up to
15 characters to each number. This allows you to make alphanumeric searches (see Phonebook searches in the User Manual).
To insert an interdigit pause, enter the "P" character using the HiPath 1100 Manager or press the Redial key using a system
telephone (see "Interdigit Pause Time Setting (227)" on page 6-255).
Numbers stored in the Speed dial phonebook can be retrieved by entering their assigned speed-dial number. This can be done
from any extension. By default there are no speed-dial numbers stored in the phonebook.
.
For the HiPath 1120, phonebook entry 249 is reserved for relay and sensor functions.
To dial an external number, enter the external line number instead of the external ac-
cess code "0."
Denied numbers list (123)
There are 3 denied numbers lists valid for all extensions in the "Restricted Trunk Access (with Denied List)" category.
list 1 allows you to store 10 numbers
●
list 2 allows you to store 25 numbers;
●
list 3 allows you to store 35 numbers.
●
To change a blocked number, simply enter its list number and then the new number.
Permission list (124)
There are 3 Permission Lists that are available for dialing from any extensions in the category "Outward-Restricted Trunk Ac-
cess":
Service Manual
Configuring the system specifically for the client
Comments about the system's programming codes
6-235