Siemens HiPath 1100 Service Manual page 270

Configuring the system specifically for the client
Comments about the system's programming codes
Mailbox Password (204)
This setting allows you to create a password for a specific mailbox. The default password is "1234".
Mailbox recording activation (205)
This setting allows you to record a greeting or a message to be played by the EVM.
Type of greeting for a mailbox (206)
This setting defines the type of greeting to be used for a specific mailbox when "Mailbox greeting configuration" is configured
as "Manual" (Option 1, Code 207).
Mailbox greeting configuration (207)
This option determines the type of greeting to be used for a specific mailbox.
•For the "Manual" option, the Type of Greeting selected (1 or 2) must be the same as in the "Mailbox Greeting Configuration"
(Code 206).
•The following settings are available for the "Day/Night" option:
– Greeting 1 (Day)
– Greeting 2 (Night).
Message Source (208)
This setting assigns a message to one of the two EVM ports. Alternatively, the message can be assigned to an MSN.
Message mode (209)
This setting specifies whether a message will be played only once or repeatedly.
Message for MSN (210)
This setting specifies whether a message will be played for a specific MSN.
System number (211)
This setting displays the number for the HiPath 1100 when the system is operating in a Point-to-Point (PP) environment.
System number type (212)
This setting specifies how an MSN configuration must be sent.
Type of voice mail (214)
This setting specifies the type of voice mail to be used by the system.
Voice mail group (215)
This setting specifies the UCD group to be used by the system.
6-270
Service Manual