Notes On Hipath 1190; Table 2-8 Examples Of System Configurations Hipath 1190 - Siemens HiPath 1100 Service Manual

System Data
System expansion limitations
PCMs are first allocated by connecting a codec in a channel and then letting the DSP transfer
this channel to another. The codec can only be connected in 2 highways, and so to interlink the
codecs with the third highway (c) it is necessary to proceed as with the first highway. The
highway (A) will not be used in this case.
The HiPath 1150 works with the dynamic allocation of timeslots during system start-up except
for some fixed resources, such as: EVM.
2.5.4

Notes on HiPath 1190

The HiPath 1190 single rack system supports up to 80 extensions
●
TME 1 module
●
This must only be mounted in slots 1 and 11. The system must therefore have both racks
mounted in order to run two modules.
Within the maximum limit of 40 external analog lines or 45 digital lines and 140 extensions,
the system may consist of, for example:
Slot
1 and 2 2 x EB 800, 2 x EB 012 or 2 x EB 210 or 1 x TME1 in slot 1 (in this case slot 2
must remain Free).
3, 4 and 14 The module configuration for extensions or external lines must not exceed 32
ports (e.g., 3 x EB 010 or 2 x EB 012 or 2 x EB 210).
5, 6 and 7 The module configuration for extensions or external lines must not exceed 32
ports.
8, 9 and 10 The module configuration for extensions or external lines must not exceed 32
ports.
11, 12 and Module configuration for extensions or external lines must not exceed 32 ports,
13 or 1 x TME1 in slot 11 and 1 x EB 010, EB 012 or EB 210 in slot 13 (in this case,
slot 12 must be left Free).
15, 16 and The module configuration for extensions or external lines must not exceed 32
17 ports.
18, 19 and The module configuration for extensions or external lines must not exceed 32
20 ports.
Table 2-8 Examples of system configurations HiPath 1190
Each of the system's Highway supports up to 32 ports. For example, Highway 2
(slots 3, 4, and 14) can accommodate two EB 800 and one EB 206, totaling 24 ports.
For Highway 1 (slots 1 and 2), when a TME1 module is placed in slot 1 (totaling 30
ports), slot 2 must remain free (except for a LAN interface module, which can be in-
stalled in slot 2).
2-36
Modules
Service Manual