Siemens HiPath 1100 Service Manual page 252

Configuring the system specifically for the client
Comments about the system's programming codes
An external-to-external transfer over an analog line is terminated in the following
three situations:
• Elapsed timeout for external-to-external connection
(code 218)
• When a busy signal is detected
• Type of answering signal (Code 158).
Conditional forwarding limited by extension (097)
Incoming calls can be forwarded to a specified destination list, as configured in a TAPI-type application such as a Windows
TAPI Browser. The settings of the previous list or Unconditional Call Forwarding will be replaced with the new list settings.
The following information is required for configuring a list:
Incoming caller ID
●
Day of the week and time
●
Type of call (internal or external).
●
When more than one number has been specified for incoming calls to an extension, the call forwarding priority will be:
1. Checks to see if the Caller ID for the incoming call matches the number programmed for the extension
2. Checks to ensure that the Type of Call (internal or external) has been configured
3. Checks the time settings.
This configuration is available through a CTI interface.
●
The system allows up to 50 call forwarding numbers.
●
Conditional Call Forwarding has priority over an unconditional Call Forwarding.
●
Conditional Call Forwarding is not available for S
●
Functions: The extension has permission for Conditional Call Forwarding and the system is connected to a PC
running a TAPI application.
1. Conditional Call Forwarding rules and conditions for a specified extension can
be defined by using a Windows TAPI application
2. Apply the settings to the extension desired.
3. From this moment on the extension will be forwarded.
Permission for Conditional Call Forwarding (098)
This allows a conditional forwarding to occur.
6-252
extensions.
0
Service Manual