Installing An External Audio Source; Installing A Tfe - Entrance Telephone Interface; Models: S30817-K930-A300 And S30122-K7696-T313 - Siemens HiPath 1100 Service Manual

Installation

Installing an external Audio Source

4.12 Installing an external Audio Source
The HiPath 1100 systems provide connections for audio devices, such as radios, tuners, CD,
MD, and others.
HiPath 1120
●
The audio source must be connected to a music optional module using an RCA Connector
in slot X1 (see Figure 4-39 on page 4-170).
HiPath1150/1190/1190R
●
The audio source must be connected to the MB on slot X8.
Pins 3 and 4 for HiPath 1150 (See Figure 4-40 on page 4-172).
Pins 1 and 2 for HiPath 1190/1190R (See Figure 4-41 on page 4-176).
4.13

Installing a TFE - entrance telephone interface

4.13.1

Models: S30817-K930-A300 and S30122-K7696-T313

S30817-K930-A300 (without amplifier)
●
S30122-K7696-T313 (with amplifier)
●
Installation procedures
Step
1. Connect your system to the TFE interface, see "Internal entrance telephone with
TFE interface" on page 3-103.
2. Connect the entrance telephone to the TFE interface
3. "Performing a visual inspection" on page 4-189.
4. Configure the required data (see "Operation" on page 7-278).
4-180
Procedure
Service Manual