Configuring The Unit - Paradyne Hotwire 8775 User Manual

Procedure
To change Identity information:

Configuring the Unit

Configuration option settings determine how the termination unit operates. Use the
Configuration menus to select, display, or change configuration option settings.
The unit is shipped with factory settings that match the options and settings in the
Default Factory Configuration area.
To display configuration options, follow this menu selection sequence:
Then, load a configuration option set into the configuration edit area.
8700-A2-GB25-10
1. Position the cursor in the System Name field. Enter a name unique in your
network to identify the SNMP managed node (or unit)
2. Position the cursor in the System Location field. Enter the physical location of
the unit.
3. Position the cursor in the System Contact field. Enter the name and contact
information for the person responsible for the unit.
4. Press Ctrl-a to switch to the function keys area below the dotted line.
5. Select Save and press Enter.
Main Menu Configuration (Load Configuration From)
main/configuration
Slot: 4
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
February 2001
3. Initial Startup and Configuration
LOAD CONFIGURATION FROM:
Current Configuration
Configuration Loader
Default Factory Configuration
Hotwire
Model: 87x5
MainMenu Exit
3-3