Switching Between Screen Areas - Paradyne Hotwire 8775 User Manual

2. Using the Asynchronous Terminal Interface

Switching Between Screen Areas

Select Ctrl-a to switch between the two screen areas to perform all screen
functions.
Procedure
To access the function key and message area below the dotted line:
2-8
1. Press Ctrl-a to switch from the screen area to the function key and message
area below the dotted line.
2. Select either the function's designated (underlined) character or press the Tab
key until you reach the desired function key.
Example:
To save the current options, type s or S (Save).
3. Press Enter. The function is performed.
4. To return to the screen area above the dotted line, press Ctrl-a again.
main/config/network
Slot: 4
Port: 3
Margin Threshold:
Excessive Error Rate Threshold:
AutoRate
DSL Line rate
Circuit Identifier:
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
February 2001
NETWORK INTERFACE OPTIONS
Hotwire
Model: 87x5
–3db
1E–5
Disable
2064
Clear
MainMenu Exit
8700-A2-GB25-10