Download Print this page

HP 5900 series Command Reference Manual: Lldp Timer Tx-interval; Lldp Tlv-enable

Layer 2 - lan switching.
Hide thumbs

Advertisement

If the LLDPDU transmit delay is greater than the LLDPDU transmit interval, the device uses the LLDPDU
transmit delay as the transmit interval.
Examples
# Set the LLDPDU transmit delay to 4 seconds.
<Sysname> system-view
[Sysname] lldp timer tx-delay 4
Related commands

lldp timer tx-interval

lldp timer tx-interval
Use lldp timer tx-interval to set the LLDPDU transmit interval.
Use undo lldp timer tx-interval to restore the default.
Syntax
lldp timer tx-interval interval
undo lldp timer tx-interval
Default
The LLDPDU transmit interval is 30 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Sets the LLDPDU transmit interval in the range of 5 to 32768 seconds.
Usage guidelines
It is a good practice to set the LLDPDU transmit interval to be no less than four times the LLDPDU transmit
delay.
If the LLDPDU transmit interval is less than the LLDPDU transmit delay, the device uses the LLDPDU transmit
delay as the transmit interval.
Examples
# Set the LLDPDU transmit interval to 20 seconds.
<Sysname> system-view
[Sysname] lldp timer tx-interval 20
Related commands
lldp timer tx-delay
lldp tlv-enable
Use lldp tlv-enable to configure the types of advertisable TLVs.
Use undo lldp tlv-enable to disable the advertising of specific types of TLVs.
192

Advertisement

Table Of Contents

   Related Content for HP 5900 series

This manual also for:

5920 series

Comments to this Manuals

Symbols: 0
Latest comments: