Display Link-Aggregation Verbose - HP 5900 series Command Reference Manual

Usage guidelines
Information about the remote system for a static link aggregation group is displayed as none or not
displayed at all, because static link aggregation groups are unaware of information about the peer
groups.
Examples
# Display the summary information for all aggregation groups.
<Sysname> display link-aggregation summary
Aggregate Interface Type:
BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG
Interface
-------------------------------------------------------------------------------
BAGG1
BAGG10
Table 17 Command output
Field
Aggregate Interface Type
Aggregation Mode
Loadsharing Type
Actor System ID
AGG Interface
AGG Mode
Partner ID
Selected Ports
Unselected Ports
Share Type

display link-aggregation verbose

Use display link-aggregation verbose to display detailed information about the aggregation groups that
correspond to the aggregate interfaces.
AGG Partner ID
Mode
S none
D 0x8000, 000f-e267-57ad
Description
Aggregate interface type:
•
BAGG—Layer 2 aggregate interface.
•
RAGG—Layer 3 aggregate interface.
Aggregation group type:
•
S—Static link aggregation.
•
D—Dynamic aggregation.
Load sharing type:
•
Shar—Load sharing.
•
NonS—Non-load sharing.
Local system ID, which comprises the system LACP priority and the system
MAC address.
Type and number of the aggregate interface.
Aggregation group type.
System ID of the partner, which comprises the system LACP priority and the
system MAC address.
Total number of Selected ports.
Total number of Unselected ports.
Load sharing type.
Selected
Ports
1
2
75
Unselected Share
Ports Type
0 Shar
0 Shar