Link-Aggregation Selected-Port Maximum; Link-Aggregation Selected-Port Minimum - HP 5900 series Command Reference Manual

Layer 2 - lan switching
Hide thumbs Also See for 5900 series:
Table of Contents

Advertisement

link-aggregation selected-port maximum

Use link-aggregation selected-port maximum to configure the maximum number of Selected ports
allowed in the aggregation group.
Use undo link-aggregation selected-port maximum to restore the default setting.
Syntax
link-aggregation selected-port maximum number
undo link-aggregation selected-port maximum
Default
The maximum number of Selected ports allowed in an aggregation group is limited only by the hardware
capabilities of the ports.
Views
Aggregate interface view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of Selected ports allowed in an aggregation group. The value
range for this argument is 1 to 16.
Usage guidelines
Executing this command might cause some of the selected member ports in an aggregation group to
become unselected.
The maximum numbers of Selected ports allowed in the aggregation groups of the local and peer ends
must be consistent.
After you manually configure the maximum number of Selected ports in an aggregation group, the
maximum number of Selected ports allowed in the aggregation group is limited by both the configured
number and hardware capabilities, that is, the lower value of the two upper limits.
You can configure redundancy between two ports by using the following guideline: Assign two ports to
an aggregation group, and configure the maximum number of Selected ports allowed in the
aggregation group as 1. In this way, only one Selected port is allowed in the aggregation group at any
point in time, while the Unselected port serves as a backup port.
Examples
# Configure the maximum number of Selected ports allowed as 5 in the aggregation group that
corresponds to aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation selected-port maximum 5
Related commands

link-aggregation selected-port minimum

link-aggregation selected-port minimum
85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5920 series

Table of Contents