HP 5900 series Command Reference Manual: Qinq Enable

Layer 2 - lan switching.
Hide thumbs

Advertisement

Interface
Ten-GigabitEthernet1/0/1
Ten-GigabitEthernet1/0/3
Table 34 Command output
Field
Interface
Ten-GigabitEthernet1/0/1
Related commands

qinq enable

qinq enable
Use qinq enable to enable QinQ on an Ethernet interface.
Use undo qinq enable to restore the default.
Syntax
qinq enable
undo qinq enable
Default
QinQ is disabled on Ethernet interfaces.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Examples
# Enable QinQ on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qinq enable
Related commands
display qinq
qinq ethernet-type customer-tag
Use qinq ethernet-type customer-tag to configure the CVLAN TPID.
Use undo qinq ethernet-type customer-tag to restore the default CVLAN TPID.
Syntax
qinq ethernet-type customer-tag hex-value
undo qinq ethernet-type customer-tag
Description
Interface name.
QinQ-enabled interface.
159

Advertisement

This manual also for:

5920 series

Comments to this Manuals

Symbols: 0
Latest comments: