HP 5900 series Command Reference Manual Page 17

Layer 2 - lan switching.
Hide thumbs

Advertisement

Field
aborts
ignored
parity errors
Output(total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0
multicasts, 0 pauses
Output(normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0
multicasts, 0 pauses
output errors
Description
Total number of illegal inbound packets:
Fragment frames—CRC error frames shorter than 64 bytes. The
length can be an integral or non-integral value.
Jabber frames—CRC error frames greater than the maximum
frame length supported on the Ethernet interface (with an
integral or non-integral length).
Symbol error frames—Frames that contained at least one
undefined symbol.
Unknown operation code frames—Non-pause MAC control
frames.
Length error frames—Frames whose 802.3 length fields did not
match the actual frame length (46 to 1500 bytes).
IMPORTANT:
For an Ethernet interface that does not permit jumbo frames, if
the port is a QSFP+ port, or an SFP+ port with a 10-Gigabit
transceiver module plugged, jabber frames refer to CRC error
frames larger than 1536 bytes (excluding the 4 bytes of CRC
and ignoring the VLAN tags).
For an Ethernet interface that permits jumbo frames, if the port is
an SFP+ port with a Gigabit transceiver module plugged,
jabber frames refer to CRC error frames larger than 1532 bytes
(without VLAN tags and excluding the 4 bytes of CRC) or 1536
bytes (with VLAN tags and excluding the 4 bytes of CRC).
For an Ethernet interface that permits jumbo frames, jabber
frames refer to CRC error frames larger than the maximum
length of Ethernet frames that are allowed to pass through,
which is configured when you configure jumbo frame support on
the interface.
The number of inbound frames dropped because the receive buffer
of the port ran low.
Total number of frames with parity errors.
Outbound traffic statistics (in packets and bytes) for the interface.
All outbound normal and abnormal packets and normal pause
frames were counted.
The number of outbound unicast packets, the number of outbound
broadcasts, the number of outbound multicasts, and the number of
outbound pause frames.
A hyphen (-) indicates that the item is not supported.
Outbound normal traffic and pause frame statistics (in packets and
bytes) for the interface.
The number of outbound normal unicast packets, the number of
outbound normal broadcasts, the number of outbound normal
multicasts, and the number of outbound normal pause frames.
A hyphen (-) indicates that the item is not supported.
The number of outbound packets with errors.
10

Advertisement

This manual also for:

5920 series

Comments to this Manuals

Symbols: 0
Latest comments: